-
MIK-1158-J Wall mounted ultrasonic flowmeter
MIK-1158-J ultrasonic flow meter uses advance circuit design,coupled with excellent hardware designed in English and can be switched surfaces.It is easy to operate and with stable performance. Features
- Pipe diameter:DN25-DN600
- Accuracy: ±1%
- Power supply: 10～36VDC/1A
- Output: 4～20mA, RS485
Tel.: +86 13018908613 (WeChat) Email: vip@Sinomeasure.com
-
MIK-LZ Metal tube rotameter
MIK-LZ Metal Tube Rotameter is a device that measures the volumetric flow rate of fluid in a closed tube. It belongs to a class of meters called variable-area flowmeters, which measure flow rate by allowing the cross-sectional area the fluid travels through to vary, causing a measurable effect. Features Inpress protection: IP65
Range ratio: Standard: 10:1
Pressure: Standard: DN15~DN50≤4.0MPa, DN80~DN400≤1.6MPa
Connection: Flange, Clamp, ThreadHotline: +86 15867127446Email : info@Sinomeasure.com -
MIK-2000H Handheld ultrasonic flowmeter
MIK-2000H ultrasonic flow meter uses advance circuit design,coupled with excellent hardware designed in English and can be switched surfaces.It is easy to operate and with stable performance Features
- Pipe diameter:DN32-DN6000
- Accuracy:1.0%
- Power supply: 3 AAA built-in Ni-H batteries
- Case material: ABS
Tel.: +86 15867127446 (WhatApp)Email : info@Sinomeasure.com
-
MIK-1158S Wall mounted ultrasonic flowmeter
MIK-1158S Wall mounted clamp on ultrasonic flow meter uses advance circuit design,coupled with excellent hardware designed in English and can be switched surfaces.It is easy to operate and with stable performance. Features
- Pipe diameter:DN32-DN6000
- Accuracy: ±1%
- Power supply: 10～36VDC/1A
- Output: 4～20mA, relay, RS485
Tel.: +86 15867127446 (WhatApp)Email : info@Sinomeasure.com
-
MIK-LWGY Turbine flow sensor thread connection
MIK-LWGY series liquid turbine flow sensor is a kind of speed instrument, which has the advantages of high accuracy, good repeatability, simple structure, small pressure loss and convenient maintenance. It is used to measure the volume flow of low viscosity liquid in closed pipe. Features
- Pipe diameter:DN4~DN100
- Accuracy: 0.2% 0.5% 1.0%
- Power supply: 3.6V lithium battery; 12VDC; 24VDC
- Ingress protection: IP65
-
MIK-LDG-C Electromagnetic flow meter
High accuracy magnetic flowmeter. Special flow meter for chemical and pharmaceutical industry. The latest models in 2021 Features
- Pipe diameter: DN15~DN1000
- Accuracy: ±0.5%(Flow speed > 1m/s)
- Reliably:0.15%
- Electric conductivity: Water: Min. 20μS/cm; Other liquid:Min.5μS/cm
- Turndown ratio: 1:100
Tel.: +86 15867127446 (WhatApp)Email : info@Sinomeasure.com
-
MIK-LWGY Turbine flowmeter thread connection
MIK-LWGY series liquid turbine flowmeter is a kind of speed instrument, which has the advantages of high accuracy, good repeatability, simple structure, small pressure loss and convenient maintenance. It is used to measure the volume flow of low viscosity liquid in closed pipe. Threaded type, simple to install and maintain, usually used for small diameter flow measurements: Male:DN4~DN100; female:DN15~DN50 Features
- Pipe diameter:DN4~DN100
- Accuracy: 0.2% 0.5% 1.0%
- Power supply: 3.6V lithium battery; 12VDC; 24VDC
- Ingress protection: IP65
-
MIK-LWGY Turbine flowmeter flange connection
MIK-LWGY series liquid turbine flowmeter is a kind of speed instrument, which has the advantages of high accuracy, good repeatability, simple structure, small pressure loss and convenient maintenance. It is used to measure the volume flow of low viscosity liquid in closed pipe. In the petroleum, chemical, metallurgy, water supply, paper and other industries with a wide range of applications. Features
- Pipe diameter:DN4~DN200
- Accuracy: 0.5%R, 1.0%R
- Power supply: 3.6V lithium battery; 12VDC; 24VDC
- Ingress protection: IP65
Hotline: +86 15867127446Email : info@Sinomeasure.com
-
MIK-LUGB Vortex flowmeter with temperature & pressure compensation
MIK-LUGB Vortex flowmeter work on the principle of generated vortex and relation between vortex and flow by theory of Karman and Strouhal, which specialize in measurement of steam, gas and liquid of lower viscosity.
Features
- Pipe diameter:DN10-DN500
- Accuracy: 1.0% 1.5%
- Range Ratio: 1:8
- Ingress protection: IP65
Tel.: +86 15867127446 (WhatApp)Email : info@Sinomeasure.com
-
MIK-LUGB Vortex flowmeter without temperature & pressure compensation
MIK-LUGB Vortex flowmeter work on the principle of generated vortex and relation between vortex and flow by theory of Karman and Strouhal, which specialize in measurement of steam, gas and liquid of lower viscosity. Features
- Pipe diameter:DN10-DN300
- Accuracy: 1.0% 1.5%
- Range Ratio: 1:8
- Ingress protection: IP65
Tel.: +86 15867127446 (WhatApp)Email : info@Sinomeasure.com
-
MIK-LDG Remote type electromagnetic flowmeter
Electromagnetic flowmeter is only applicable to measure the flow of conductive liquid, which is wide used in water supply, sewage water measuring, industry chemical measuring etc. The remote type is with high IP protection class and can be installed in different locations for the transmitter and converter. Output signal can pulse,4-20mA or with RS485 communication.
Features
- Accuracy:±0.5%(Flow speed > 1m/s)
- Reliably:0.15%
- Electric conductivity: Water: Min. 20μS/cm
Other liquid:Min.5μS/cm
- Flange:ANSI/JIS/DIN DN15…1000
- Ingress protection:IP68
-
MIK-LDG Sanitary electromagnetic flowmeter for food processing
SUP-LDG Sanitary electromagnetic flowmeter is made of stainless steel, which is widely used in water supply, waterworks, food processing, etc. It supports pulse, 4-20mA or RS485 communication signal output.
Features
- Accuracy:±0.5%(Flow speed > 1m/s)
- Reliably:0.15%
- Electric conductivity: Water: Min. 20μS/cm
Other liquid:Min.5μS/cm
- Flange:ANSI/JIS/DIN DN15…1000
- Ingress protection:IP65
Tel.: +86 15867127446 (WhatApp)Email : info@Sinomeasure.com
